# SkyWater Technology, LLC (SKYT) FY 2024 MD&A

Verbatim Item 7 Management's Discussion and Analysis from SkyWater Technology, LLC's 10-K for fiscal year 2024.

SEC filing source: https://www.sec.gov/Archives/edgar/data/1819974/000181997425000010/skyt-20241229.htm
Accession: 0001819974-25-000010
Filing date: 2025-03-14
Report date: 2024-12-29
Extracted structurally from real Item 7 body heading to real Item 7A/8 boundary.
Confidence: high

Company profile: /company/SKYT/
All MD&A years: /company/SKYT/mda/
Previous year: /company/SKYT/mda/fy2023/ (FY 2023)
Next year: /company/SKYT/mda/fy2025/ (FY 2025)

ITEM 7.    MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

The following discussion and analysis of the Company’s financial condition and results of operations should be read in conjunction with the Company’s audited annual consolidated financial statements and related notes in Item 8 of this Annual Report on Form 10-K. Item 7 in this Form 10-K discusses the Company's fiscal year 2024 and fiscal year 2023 results and the year-over-year comparisons between fiscal year 2024 and fiscal year 2023. Discussion of the fiscal year 2023 results and the year-over-year comparisons between fiscal year 2023 and fiscal year 2022 can be found in “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in Part II, Item 7 of the Annual Report on Form 10-K for the year ended December 31, 2023, filed with the SEC on March 15, 2024, and incorporated by reference in this Form 10-K. In addition to historical financial information, the following discussion contains forward-looking statements that reflect the Company’s current expectations, estimates, and assumptions concerning events and financial trends that may affect future operating results or financial position. Actual results and the timing of events may differ materially from those discussed or implied in the Company’s forward-looking statements due to a number of factors, including those described in the sections entitled “Risk Factors” and “Special Note Regarding Forward-Looking Statements” and elsewhere herein.

SkyWater's fiscal year ends on the Sunday closest to the end of the twelfth calendar month. We refer to the fiscal years ended December 29, 2024 and December 31, 2023 as fiscal year 2024 and fiscal year 2023, respectively. Fiscal years 2024 and 2023 each include 52 weeks. All percentage amounts and ratios presented in this management’s discussion and analysis were calculated using the underlying data in thousands. Unless otherwise indicated, all changes identified for the current period results represent comparisons to results for the prior corresponding period.

For purposes of this section, the terms “we,” “us,” “our,” and “SkyWater” refer to SkyWater Technology, Inc. and its subsidiaries collectively.

Overview

We are a U.S.-based, independent, pure-play technology foundry that offers advanced semiconductor development and manufacturing services from our fabrication facility, or fab, in Minnesota and advanced packaging services from our Florida facility. Our TaaS model leverages a strong foundation of proprietary technology to co-develop process technology IP with our customers that enables disruptive concepts through our ATC for diverse microelectronics (“ICs”) and related micro- and nanotechnology applications. In addition to differentiated technology development services, we support customers with volume production of ICs for high-growth markets through our Wafer Services.

The combination of semiconductor development and manufacturing services we provide our customers is not available to them from a conventional fab. In addition, we believe our status as a publicly-traded, U.S.-based pure-play technology foundry with DMEA Category 1A Trusted Accreditation from the DoD positions us well to provide distinct, competitive advantages to our customers. These advantages include the benefits of enhanced IP security and secure access to a U.S. domestic supply chain.

We primarily focus on serving diversified, high-growth end users in numerous vertical markets, including (1) advanced compute, (2) A&D, (3) automotive, (4) bio-health, and (5) industrial. By housing both development and manufacturing in a single operation, we rapidly and efficiently transition newly-developed processes to high-yielding volume production, eliminating the time it would otherwise take to transfer production to a third-party fab. Through our ATS model, we specialize in co-creating with our customers advanced solutions that directly serve our end markets, such as infrared imaging, superconducting ICs for quantum computing, CMOS, integrated photonics, MEMS, technologies for biomedical and imaging applications, and advanced packaging. Our Wafer Services include the manufacture of silicon-based analog and mixed-signal ICs for our end markets. Our focus on the differentiated analog and CMOS markets supports long product life-cycles and requirements that value performance over cost-efficiencies, and leverages our portfolio IP.

44

Factors and Trends Affecting our Business and Results of Operations

The following trends and uncertainties either affected our financial performance in fiscal year 2024 and fiscal year 2023, or are reasonably likely to impact our results in the future.

•Macroeconomic and competitive conditions, including cyclicality and consolidation, as well as government funding in semiconductor technology and manufacturing, create unique challenges and opportunities for the semiconductor industry and SkyWater.

•In August 2022, the U.S. enacted the CHIPS and Science Act pursuant to which the United States has committed to a renewed focus on providing incentives and funding for onshore companies to develop and advance the latest semiconductor technologies, supporting onshore manufacturing capabilities, and on strengthening key onshore supply chains. The CHIPS Act authorizes the U.S. Department of Commerce to enable execution of awards under the CHIPS Act and provides $52.7 billion for American semiconductor research, development, manufacturing, and workforce development, including $39 billion in financial assistance to build, expand, or modernize domestic facilities and equipment for semiconductor fabrication, assembly, testing, advanced packaging, or research and development. In December 2023, we submitted an application to the CHIPS Program Office of the U.S. Department of Commerce for funding through the CHIPS and Science Act for modernization and equipment upgrades to enhance production at our Minnesota facility. In December 2024, we signed a preliminary memorandum of terms that provides for up to $16 million pursuant to the CHIPS and Science Act, which is in addition to $19 million in incentives from the State of Minnesota. The federal funding is expected to be received in 2026, and the state incentives are expected to be received starting in the fourth quarter of 2025.

•Our overall level of indebtedness from our revolving credit agreement, which we refer to as the Revolver (as defined in Note 6 – Debt to the consolidated financial statements), financing arising from the sale and leaseback of the land and building of our Minnesota facility, which we refer to as the VIE Financing, financing arrangements with lenders to finance the purchase of manufacturing tools and other equipment, which we refer to as the Tool Financing Loans, and the corresponding interest rates charged to us by our lenders, are key components of maintaining capital funding that allow us to continue to grow our business.

Pending Acquisition

On February 25, 2025, the Company entered into a Membership Interest Purchase Agreement (the “Purchase Agreement”) with Spansion LLC (“Seller”), an affiliate of Infineon Technologies AG, pursuant to which, subject to the satisfaction or waiver of the conditions contained therein, the Company will acquire all of the issued and outstanding memberships interests of a limited liability company that will be formed prior to closing and that will receive, pursuant to a pre-closing restructuring, certain assets and liabilities related to Infineon Technologies AG’s 200 mm fab in Austin, Texas (the “Transaction”). The purchase price for the Transaction is expected to be approximately $110 million, comprised of a base purchase price for the Transaction of $80 million ($55 million of which will be paid at closing), plus a payment at closing for working capital, estimated to be approximately $30 million, subject to adjustment. The payment of the remaining $25 million of the base purchase price will be deferred for four years and will be paid by wafer credits under a wafer supply agreement with an affiliate of Seller, which agreement will be executed at the closing of the Transaction pursuant to the Purchase Agreement.

The Transaction is subject to the satisfaction or waiver of certain customary closing conditions, including, among other things: (1) the accuracy of the representations and warranties of each party to the Purchase Agreement; (2) the performance by each party of its obligations and covenants in all material respects; (3) the absence of a material adverse effect between the signing of the Purchase Agreement and the closing of the Transaction; (4) the absence of any applicable order or law prohibiting the Transaction; and (5) obtaining U.S. regulatory approval.

Under the Purchase Agreement, the closing of the Transaction shall occur no earlier than May 30, 2025, unless otherwise agreed mutually by the parties. The Purchase Agreement may be terminated by mutual written agreement of the Company and Seller or by either the Company or Seller in limited circumstances, including, among other things, (i) certain uncured breaches of any representation, warranty, covenant or obligation in the Purchase Agreement by the other party; (ii) failure to complete the Transaction by September 30, 2025; and (iii) the existence of an order by a governmental authority prohibiting the Transaction.

The Company intends to finance the purchase price for the Transaction through debt financing.

Financial Performance Metrics

Our senior management team regularly reviews certain key financial performance metrics within our business, including:

•Revenue and gross profit;

•Net loss; and

•Earnings before interest, taxes, depreciation and amortization, as adjusted (“adjusted EBITDA”), which is a financial measure not prepared in accordance with accounting principles generally accepted in the United States (“GAAP”), that excludes certain items that may not be indicative of our core operating results, as well as items that can vary widely across different industries or among companies within the same industry. For information regarding our non-GAAP financial measure, see the section entitled “—Non-GAAP Financial Measure” below.

45

Results of Operations

This section contains an analysis of our results of operations presented in the accompanying consolidated statement of operations.

Fiscal Year 2024 Compared to Fiscal Year 2023

The following table summarizes certain financial information relating to our operating results for the fiscal years ended December 29, 2024 and December 31, 2023.

[[GREPCENT_TABLE]]
[["","Fiscal Year Ended","","PercentageChange"],["","December 29, 2024","","December 31, 2023"],["","(in thousands)"],["Consolidated statements of operations data:"],["Revenue","$","342,269","","","$","286,682","","","19","%"],["Cost of revenue","272,643","","","227,390","","","20","%"],["Gross profit","69,626","","","59,292","","","17","%"],["Research and development expense","15,040","","","10,169","","","48","%"],["Selling, general, and administrative expense","48,026","","","63,911","","","(25)","%"],["Operating income (loss)","6,560","","","(14,788)","","","(144)","%"],["Other expense:"],["Interest expense","8,837","","","10,826","","","(18)","%"],["Total other expense","8,837","","","10,826","","","(18)","%"],["Loss before income taxes","(2,277)","","","(25,614)","","","(91)","%"],["Income tax expense (benefit)","240","","","(521)","","","146","%"],["Net loss","(2,517)","","","(25,093)","","","(90)","%"],["Less: net income attributable to noncontrolling interests","4,276","","","5,663","","","(24)","%"],["Net loss attributable to SkyWater Technology, Inc.","$","(6,793)","","","$","(30,756)","","","(78)","%"]]
[[/GREPCENT_TABLE]]

Revenue

Revenue increased $55.6 million, or 19%, to $342.3 million for fiscal year 2024, from $286.7 million for fiscal year 2023. The increase for fiscal year 2024 was primarily driven by an increase in customer-funded tool revenue.

The following table shows revenue by service type for fiscal year 2024 and fiscal year 2023:

[[GREPCENT_TABLE]]
[["","Fiscal Year Ended","","","","Percentage Change"],["","December 29, 2024","","December 31, 2023"],["","(in thousands)"],["ATS development","$","238,645","","","$","210,904","","","","","13","%"],["Tools","76,763","","","14,651","","","","","424","%"],["Wafer Services","26,861","","","61,127","","","","","(56)","%"],["Total","$","342,269","","","$","286,682","","","","","19","%"]]
[[/GREPCENT_TABLE]]

46

ATS development revenue increased $27.7 million, or 13%, from $210.9 million for fiscal year 2023 to $238.6 million for fiscal year 2024. Of this increase, $39.9 million was primarily driven by continued momentum in U.S. government programs to bolster the domestic semiconductor supply chain and strengthen the defense industrial base. Offsetting these gains, revenue from consumer customers decreased by $5.6 million and revenue from cloud computing customers declined by $5.3 million due to the cyclicality of the stages of our customers’ development programs.

Tools revenue increased $62.1 million, or 424%, from $14.7 million for fiscal year 2023 to $76.8 million for fiscal year 2024 driven by increased investment by our customers to acquire tools that advance our capabilities of their ATS development programs.

Wafer Services revenue decreased $34.3 million, or 56%, from $61.1 million for fiscal year 2023 to $26.9 million for fiscal year 2024. The decrease was primarily driven by decreased activity within the automotive segment as a result of higher inventory levels and softening demand in our automotive customers’ end markets.

Cost of revenue

Cost of revenue increased $45.3 million, or 20%, from $227.4 million for fiscal year 2023 to $272.6 million for fiscal year 2024. The increase was primarily driven by a $60.5 million increase in the cost of tools revenue arising from increased tools revenue as we procure tools on behalf of our customers to advance our capabilities for their ATS development programs. This was partially offset by a $10.5 million decrease in depreciation expense on manufacturing equipment, as assets from the 2017 acquisition were fully depreciated in the first quarter of fiscal year 2024. The remaining $4.7 million decrease was related to labor costs primarily due to lower variable compensation expense and temporary labor.

Research and development expense

Research and development expense increased $4.9 million, or 48%, from $10.2 million for fiscal year 2023 to $15.0 million for fiscal year 2024. The increase was driven by an incremental $6.3 million investment in enhancing platform capabilities, particularly for the RH90 and SL90 initiatives.

Selling, general and administrative expense

Selling, general and administrative expense decreased $15.9 million, or 25%, from $63.9 million for fiscal year 2023 to $48.0 million for fiscal year 2024. The decrease was primarily attributable to significant one-time expenses incurred in 2023, including $11.4 million in project-based external management operations consulting services related to long-term transformation activities focused on improvement in automation and operational efficiency and $1.2 million in project-based specialist fees related to submission of our CHIPS Act application. The remaining $2.7 million decline was attributable to a combination of reduced variable costs, aligned with lower production volumes, and improvements in automation and operational efficiency.

Interest expense

Interest expense decreased $2.0 million, or 18%, from $10.8 million for fiscal year 2023 to $8.8 million for fiscal year 2024. The decrease was primarily the result of decreased amounts outstanding under the Revolver and tool financing loans, as well as a renegotiated, lower interest rate on outstanding borrowings under the Revolver in fiscal year 2024 as compared to fiscal year 2023.

Income tax expense (benefit)

Income tax expense was $0.2 million for fiscal year 2024 compared to income tax benefit of $0.5 million for fiscal year 2023. The effective income tax rate was (10.5)% for fiscal year 2024 compared to 2.0% for fiscal year 2023. The effective income tax rates for fiscal years 2024 and 2023 differ from the U.S. statutory tax rate of 21% primarily due to application of a valuation allowance against our net deferred tax assets resulting from our assessment of our ability to utilize those deferred tax assets in future periods.

Net income attributable to noncontrolling interests

Net income attributable to noncontrolling interests decreased to $4.3 million for fiscal year 2024 from $5.7 million for fiscal year 2023. Net income attributable to noncontrolling interests reflects the net income of Oxbow Realty, the variable interest entity (“VIE”), that we consolidate and represents the economic interest in the profits and losses of the VIE that the owners of our shareholders’ equity do not legally have rights or obligations to. The decrease in the net income attributable to noncontrolling interests primarily relates to timing differences in the recognition of rental income related to the failed sale leaseback of the Minnesota facility.

Net loss

Net loss decreased $22.6 million, or (90)% from $(25.1) million for fiscal year 2023 to $(2.5) million for fiscal year 2024. The decrease was the result of the net impacts of the decreases and increases described above related to the components of our results of operations.

47

Adjusted EBITDA

Adjusted EBITDA decreased $3.0 million, or (8)%, to $34.3 million for fiscal year 2024 from $37.2 million for fiscal year 2023. The decrease in adjusted EBITDA was a result of the significant increase in customer-funded tool revenue in 2024, which has a lower margin profile due to costs associated to procure and install, as well as increased labor and infrastructure costs as we continue to scale our business to meet the demands of our customers. For a discussion of adjusted EBITDA as well as a reconciliation to the most directly comparable U.S. GAAP measure, see the section below entitled “—Non-GAAP Financial Measure.”

Liquidity and Capital Resources

General

For the fiscal years ended December 29, 2024, December 31, 2023, and January 1, 2023, the Company incurred net losses attributable to SkyWater Technology, Inc. of $6.8 million, $30.8 million, and $39.6 million, respectively. As of December 29, 2024 and December 31, 2023, the Company held cash and cash equivalents of $18.8 million and $18.4 million, respectively.

SkyWater’s ability to execute its operating strategy is dependent on its ability to maintain liquidity and continue to access capital through the Revolver (as defined in Note 6 – Debt), and other sources of financing. The current business plans indicate that the Company maintains sufficient liquidity to continue its operations and maintain compliance with financial covenants for the next twelve months from the date the consolidated financial statements are issued. As a result of amendments made on November 19, 2024, the Revolver matures on December 31, 2028 and provides for a maximum revolving facility amount of $130 million. In regard to the Transaction, SkyWater intends to pay the base purchase price of $80 million through new senior secured debt financing that we have not secured as of the date of this filing.

The Company has also obtained a support letter from Oxbow Industries, LLC (“Oxbow Industries”), an affiliate of the Company’s principal stockholder, to provide funding in an amount up to $12.5 million, if necessary, to enable the Company to meet its obligations as they become due through March 18, 2026. Based upon SkyWater’s operational forecasts, cash and cash equivalents on hand, available and expected additional borrowings on the Revolver, and the support letter from Oxbow Industries, as needed, management believes SkyWater will have sufficient liquidity to fund its operations for the next twelve months from the date these consolidated financial statements are issued.

We had $18.5 million in cash and cash equivalents, not including cash held by a VIE that we consolidate, and availability under our Revolver of $99.8 million at December 29, 2024. We are subject to certain liquidity and EBITDA covenants under our Loan Agreement, as outlined in the section below entitled “—Indebtedness.”

Open Market Sale Agreement

On September 2, 2022, the Company entered into an Open Market Sale Agreement with Jefferies LLC (the “Open Market Sale Agreement”) with respect to an at the market offering program (the “ATM Program”) under which the Company may, from time to time, offer and sell up to $100.0 million in shares of the Company’s common stock. During the fiscal year ended December 20, 2024, the Company did not sell shares under the ATM Program. During the fiscal year ended December 31, 2023, the Company sold 2,081,167 shares under the ATM Program. From the date of the Open Market Sale Agreement through December 29, 2024, the Company sold 2,516,586 shares under the Open Market Sale Agreement at an average sale price of $9.96 per share, resulting in gross proceeds of approximately $25.1 million before deducting sales commissions and fees of approximately $1.2 million. The Company used the net proceeds of approximately $23.9 million to pay down its Revolver and fund its operations. As of December 29, 2024, approximately $74.9 million in shares were available for issuance under the Open Market Sale Agreement.

48

Capital Expenditures

For fiscal years 2024 and 2023, we spent approximately $14.3 million and $12.8 million, respectively, on capital expenditures, including purchases of property, equipment and software. The majority of these capital expenditures relate to our foundry expansion in Minnesota, as discussed below, and the development of our advanced packaging capabilities at the Center for NeoVation in Florida. We anticipate our cash on hand and the availability under the Revolver will provide the funds needed to meet our customer demand and anticipated capital expenditures in fiscal year 2025.

We have approximately $25.0 million of contractual commitments related to various anticipated capital expenditures outstanding as of December 29, 2024 that we expect to be paid in fiscal year 2025 through cash on hand and operating cash flows.

Working Capital

Historically, we have depended on cash on hand, funds available under our Revolver and, in the future, we may need to depend on additional debt and equity financings to fund our growth strategy, working capital needs, and capital expenditures. We believe that these sources of funds will be adequate to provide cash, as required, to support our strategy, ongoing operations, capital expenditures, lease obligations, and working capital for at least the next twelve months. However, we cannot be certain that we will be able to obtain future debt or equity financings on commercially reasonable terms sufficient to meet our cash requirements.

At December 29, 2024, the outstanding balance of our Revolver was $30.2 million, and our remaining availability under the Revolver was $99.8 million.

The following table sets forth general information derived from our consolidated statements of cash flows for fiscal years 2024 and 2023:

[[GREPCENT_TABLE]]
[["","Fiscal Year Ended"],["","December 29, 2024","","December 31, 2023"],["","(in thousands)"],["Net cash provided by operating activities","$","18,460","","","$","10,081"],["Net cash used in investing activities","(11,205)","","","(10,489)"],["Net cash used in financing activities","(6,794)","","","(11,235)"]]
[[/GREPCENT_TABLE]]

49

Cash and Cash Equivalents

At December 29, 2024 and December 31, 2023, we had $18.8 million and $18.4 million of cash and cash equivalents, respectively. A discussion of the change in cash and cash equivalents can be found below.

Operating Activities

Cash flow from operations is driven by changes in the working capital needs associated with the various goods and services we provide, and expenses related to the infrastructure in place to support revenue generation. Working capital is primarily affected by changes in accounts receivable, contract assets, accounts payable, accrued expenses, and contract liabilities, all of which are partially correlated to and impacted by changes in the timing and volume of activities performed in our facilities. Net cash provided by operating activities was $18.5 million during fiscal year 2024, an increase of $8.3 million from $10.1 million of net cash provided by operating activities during fiscal year 2023. The increase in cash provided by operating activities in fiscal year 2024 was driven primarily by an increase in our earnings after non-cash adjustments of $8.4 million and a decrease in accounts receivable and contract assets of $20.2 million as a result of the timing of cash receipts from customers against revenue earned on customer contracts. These positive impacts were partially offset by decreases in accounts payable and accrued expenses of $10.4 million during fiscal year2024, due to the timing of the payment of amounts owed to our vendors.

Investing Activities

Our investments in capital expenditures are intended to enable revenue growth in new and expanding markets, help us meet product demand, and increase our manufacturing efficiencies and capacity. Net cash used in investing activities was $11.2 million during fiscal year 2024, a increase of $0.7 million from $10.5 million in fiscal year 2023. The increase in cash used in fiscal year 2024 reflects increased capital spending on property and equipment compared to fiscal year 2023.

Financing Activities

Net cash used in financing activities was $6.8 million during fiscal year 2024, a decrease of $4.4 million from $11.2 million during fiscal year 2023. The decrease was primarily driven by net draws of our Revolver of $4.2 million compared to net paydowns of $38.3 million in the prior year, a $20.4 million decline in net proceeds from the ATM Program, an $8.6 million decline in net proceeds from tool financing, increased principal payments on long-term debt of $2.5 million, and a $6.4 million change in noncontrolling interest activity from net contributions of $1.0 million in fiscal year 2023 to net distributions of $5.4 million in fiscal year 2024.

Indebtedness

Sale Leaseback Transaction

In 2020, we entered into an agreement to sell the land and building of our Minnesota facility to Oxbow Realty, an affiliate of our principal stockholder, for $39.0 million, less applicable transaction costs of $1.5 million and transaction services fees paid to Oxbow Realty of $2.0 million, and paid a guarantee fee to our principal stockholder of $2.0 million. We subsequently entered into an agreement to lease the land and building from Oxbow Realty for initial payments of $0.4 million per month over 20 years. The monthly payments are subject to a 2% increase each year during the term of the lease. We are also required to make certain customary payments constituting “additional rent,” including certain monthly reserve, insurance, and tax payments, in accordance with the terms of the lease. Due to our continuing involvement in the property, we are accounting for the transactions as a failed sale leaseback. Under failed sale leaseback accounting, we are deemed the owner of the land and building with the proceeds received from the sale recorded as a financial obligation.

Revolving Credit Agreement

On December 28, 2022, we entered into a Loan and Security Agreement (the “Loan Agreement”) with Siena Lending Group LLC (“Siena”). The Loan Agreement originally provided for a revolving line of credit of up to $100.0 million with an original scheduled maturity date of December 28, 2025 (the “Revolver”). On November 19, 2024, we and Siena entered into an amendment to the Loan Agreement, which, among other changes, increased the maximum revolving facility amount to $130.0 million and extended the maturity date to December 31, 2028. The Company has incurred $4.3 million of debt issuance costs in connection with the Loan Agreement, which will be amortized as additional interest expense over the term of the Revolver. At December 29, 2024, we had borrowings of $30.2 million under the Revolver.

Borrowing under the Loan Agreement is limited by a borrowing base of specified advance rates applicable to billed accounts receivable, contract assets, inventory and equipment, subject to various conditions, limits and any availability block as provided in the Loan Agreement. The Loan Agreement also provides for borrowing base sublimits applicable to each of contract assets and equipment. Under certain circumstances, Siena may, from time to time, establish and revise reserves against the borrowing base and/or the maximum revolving facility amount.

50

Borrowings under the Loan Agreement bear interest at a rate that depends upon the type of borrowing, whether a term secured overnight financing rate (“SOFR”) loan or base rate loan, plus the applicable margin. The term SOFR loan rate is a forward-looking term rate based on SOFR for a tenor of one month on the applicable day, subject to a minimum of 2.5% per annum. The base rate is the greatest of the prime rate, the Federal funds rate plus 0.5%, and 7.0% per annum. The applicable margin is an applicable percentage based on the fixed charge coverage ratio that ranges from 4.00% to 5.00% per annum for term SOFR loans and ranges from 3.00% to 4.00% per annum for base rate loans.

The Loan Agreement contains customary representations and warranties and financial and other covenants and conditions. Subject to certain cure rights, the Loan Agreement requires $10.0 million in minimum EBITDA (as defined in the Loan Agreement) calculated as of the last day of each calendar month commencing April 30, 2023 for the preceding twelve calendar months, prohibits unfunded capital expenditures in excess of $15.0 million calculated as of the last day of each calendar month commencing April 30, 2023 for the preceding twelve calendar months, and requires a minimum fixed charge coverage ratio, measured on a trailing twelve month basis, of not less than 1.00 to 1.00 if our liquidity is less than $15.0 million. In addition, the Loan Agreement places certain restrictions on our ability to incur additional indebtedness (other than permitted indebtedness), to create liens or other encumbrances (other than liens relating to permitted indebtedness), to sell or otherwise dispose of assets, to merge or consolidate with other entities, and to make certain restricted payments, including payments of dividends to our stockholders. As of December 29, 2024, we were in compliance with applicable financial covenants of the Loan Agreement and expect to be in compliance with applicable financial covenants over the next twelve months.

Due to a lockbox clause in the Loan Agreement, the outstanding loan balance is required to be serviced with working capital, and the debt is classified as short-term on the consolidated balance sheets in accordance with U.S. GAAP.

VIE Financing

On September 30, 2020, Oxbow Realty, the Company’s consolidated VIE, entered into a loan agreement for $39.0 million (the “VIE Financing”) to finance the acquisition of the building and land of the SkyWater Minnesota facility. The VIE Financing is repayable in equal monthly installments of $0.2 million over 10 years, with the balance payable at the maturity date of October 6, 2030. The interest rate under the VIE Financing is fixed at 3.44%. The VIE Financing is guaranteed by Oxbow Industries, who is also the sole equity holder of Oxbow Realty. The VIE Financing is not subject to financial covenants.

The terms of the VIE Financing include provisions that grant the lender several protective rights when certain triggering events defined in the loan agreement occur, including events tied to SkyWater’s occupancy of the SkyWater Minnesota facility and SkyWater’s financial performance. The triggering events are not financial covenants and the occurrence of these triggering events do not represent events of default, nor do they result in the VIE Financing becoming callable, rather the protective rights become enforceable by the lender. Based on the level of SkyWater’s earnings before interest, taxes, depreciation, amortization, and restructuring or rent costs relative to gross rents paid from SkyWater to Oxbow Realty, as defined in the loan agreement, a triggering event existed and the lender’s protective rights were enforceable during the first half of fiscal year 2024. Pursuant to its protective rights, the lender had retained in a restricted account amounts paid by SkyWater to Oxbow Realty pursuant to the Company’s related party lease agreement that were in excess of the scheduled debt payments paid by Oxbow Realty to the lender. The triggering event was cured during the three-month period ended June 30, 2024 and the funds held in the restricted account were remitted back to Oxbow Realty. No triggering events as defined in the loan agreement existed as of December 29, 2024.

The VIE Financing is secured by a security interest in the land and building which was the subject of the sale-leaseback transaction described above. The Company’s VIE incurred third-party transaction costs of $0.1 million, which are recognized as debt issuance costs and are amortizing as additional interest expense over the life of the VIE Financing. The Company incurred additional third-party transaction costs of $3.5 million, which are recognized as debt issuance costs and are being amortized as additional interest expense over the life of the VIE Financing.

Tool Financing Loans

We, from time to time, enter into financing arrangements with lenders to finance the purchase of manufacturing tools and other equipment. Between the fourth quarter of fiscal year 2023 and the fourth quarter of fiscal year 2024, we entered into arrangements to sell manufacturing tools and other equipment to financing lenders. In fiscal year 2024, these arrangements totaled $3.8 million. These agreements include bargain purchase options at the end of the lease terms, which we intend to exercise. These transactions represent failed sale leasebacks with the associated equipment recorded in property and equipment, net and the proceeds received, net of scheduled repayments of the financings, recorded as debt on the consolidated balance sheets.

51

Material Cash Requirements

Our material cash requirements from known contractual and other obligations primarily relate to the following, for which information on both a short-term and long-term basis is provided in the indicated notes to the consolidated financial statements:

•Debt—Refer to Note 6.

•Capital expenditure commitments—Refer to Note 12.

•Capital lease commitments—Refer to Note 14.

•Sale leaseback obligation—Refer to Note 15.

•Income Taxes—Refer to Note 7.

•Other commitments and contingencies—Refer to Note 12.

Recent Accounting Developments

For information on new accounting pronouncements, see Note 3 to the consolidated financial statements.

Emerging Growth Company and Smaller Reporting Company Status

We qualify as an “emerging growth company” pursuant to the provisions of the JOBS Act. For as long as we are an emerging growth company, we may take advantage of certain exemptions from various reporting requirements that are applicable to other public companies that are not “emerging growth companies,” including, but not limited to, not being required to comply with the auditor attestation requirements of Section 404 of the Sarbanes-Oxley Act, reduced disclosure obligations regarding executive compensation in our periodic reports and proxy statements, exemptions from the requirements of holding advisory “say-on-pay” votes on executive compensation, and shareholder advisory votes on golden parachute compensation.

The JOBS Act also permits an emerging growth company like us to take advantage of an extended transition period to comply with new or revised accounting standards applicable to public companies. We have elected to use the extended transition period for complying with new or revised accounting standards and therefore, we will not be subject to the same new or revised accounting standards as other public companies that comply with such new or revised accounting standards on a non-delayed basis.

We are also a “smaller reporting company.” If we are a smaller reporting company at the time we cease to be an emerging growth company, we may continue to rely on exemptions from certain disclosure requirements that are available to smaller reporting companies. Specifically, as a smaller reporting company we may choose to present only the two most recent fiscal years of audited financial statements in our Annual Report on Form 10-K and, similar to emerging growth companies, smaller reporting companies have reduced disclosure obligations regarding executive compensation.

Critical Accounting Estimates

In connection with preparing our consolidated financial statements in accordance with U.S. GAAP, we are required to make assumptions and estimates about future events and apply judgments that affect the reported amounts of assets, liabilities, revenue, expense, and the related disclosures. We base our assumptions, estimates, and judgments on historical experience, current trends, and other factors that management believes are relevant at the time we prepared our consolidated financial statements. On a regular basis, management reviews the accounting policies, assumptions, estimates, and judgments to ensure that our consolidated financial statements are presented fairly and in accordance with U.S. GAAP. However, because future events and their effects cannot be determined with certainty, actual results could differ materially from our assumptions and estimates.

On an ongoing basis, management evaluates its estimates, including those related to revenue recognition, valuation of long-lived assets, valuation of inventory, equity-based compensation, and income taxes. We base our estimates and judgments on historical experience and on various other factors that we believe to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may materially differ from these estimates under different assumptions or conditions.

52

Revenue Recognition

Revenue is recognized when control of promised goods or services are transferred to our customers, in an amount that reflects the consideration we expect to be entitled to in exchange for those goods or services. To recognize revenues, we apply the following five step approach: (1) identify the contract with a customer, (2) identify the performance obligations in the customer contract, (3) determine the transaction price, (4) allocate the transaction price to the performance obligations in the customer contract, and (5) recognize revenues when or as we satisfy a performance obligation. We account for a contract when it has approval and commitment from all parties, the rights of the parties are identified, payment terms are identified, the contract has commercial substance and collectability of transaction price is probable. At contract inception, we apply judgment in determining customers’ abilities and intentions to pay amounts entitled to us when due based on a variety of factors including customers’ historical payment experience.

We primarily derive revenue from the performance of ATS wafer manufacturing process development services and the manufacture and delivery of wafers via Wafer Services.

ATS Development

ATS development contracts are focused on the performance of process development services, the output of which is a manufacturing plan that defines the steps and activities needed to produce customer wafers at high volumes and with high yields. Wafer manufacturing development services do not include services to manufacture customer wafers at scale. ATS development contracts are complex and wafer manufacturing development services are often either the lone performance obligation in an ATS development contract, or the performance obligation to which the majority of the contract value is allocated. The Company has fixed price, time-and-materials and cost-plus-fixed-fee contracts with its ATS development customers. The Company’s ATS development customers receive the benefits of these services, and revenue from performance of these services are largely recognized over time as they are performed.

Revenue on fixed price contracts is recognized using either an output or input method based upon the method that best measures the value of the services performed for the Company’s customers. Whether an input or output method is selected requires judgment and is subject to thorough analysis of the terms of each fixed price contract. The Company consistently uses either its output method or input method for similar performance obligations and in similar circumstances.

The Company’s output method of revenue recognition evaluates the steps and activities needed to complete manufacturing development services and relies on surveys of steps and activities completed as of the reporting date in relation to the then current manufacturing development plans to measure the level of progress on the service. There are many steps and activities included in the Company’s manufacturing development plans. The time and effort to complete the steps and activities are very similar, which demonstrates a level of uniformity. This uniformity accurately conveys the steps and activities successfully validated during development in relation to the development plan and therefore provides a faithful representation of the progress achieved on wafer manufacturing development services. Based on the level of progress, the Company records the proportion of the transaction price allocated to wafer manufacturing development services as revenue in the period. Manufacturing development plans are subject to change as data is analyzed and the plans are revised. Development of production plans are technical endeavors and adjustment to manufacturing development plans may impact the percentage of progress achieved and result in cumulative adjustments of revenue.

The Company uses the input method of revenue recognition for larger customer programs that are focused on development of new applications, or whose manufacturing processes will rely on new or emerging technologies. Wafer manufacturing development services for these customers is inherently more complex and requires more changes to manufacturing development plans over the period of service performance. Given the level of technical complexity and the expectation that there will be more changes to manufacturing plans as compared to other customer programs, the Company measures progress by comparing costs incurred to date to estimated total cost required to complete wafer manufacturing development services. The Company records that proportion of the transaction price allocated to wafer manufacturing development services as revenue in the period. Costs include labor costs, manufacturing costs, material costs, and other direct costs incurred while performing the services. The estimation of total costs requires significant judgment and any adjustment to estimates of total cost may impact the percentage of progress achieved and could result in cumulative adjustments of revenue.

When contracts are fixed price, the Company completes an evaluation of onerous ATS development contracts as of the reporting date for each separate contract, not for separate performance obligations in each contract. The Company recognizes losses on onerous ATS development contracts depending on whom the customer is based on the following:

•U.S. Federal Government – The Company designates all ATS development contracts with the U.S. Federal Government as production-type service contracts; accordingly, it accrues liabilities for onerous contracts in the period it becomes evident the contract will result in a loss.

•Customers other than the U.S. Federal Government – As the Company generally develops wafer manufacturing plans for its customers under ATS development contracts, ATS development contracts with non-U.S. Federal Government ATS development customers do not represent production-type service contracts; accordingly, the Company recognizes losses as the losses are incurred; it does not accrue liabilities for anticipated future losses.

In addition, ATS development revenue includes lease revenue consistent with Topic 842 (as defined below). SkyWater executed a contract with a customer that includes an operating lease for the right to use a specified portion of the Company’s Minnesota facility to produce wafers using the customer’s equipment. The contractual amounts that relate to revenue from an operating lease are recorded as deferred revenue, and are recognized over the estimated lease term.

53

Tools

SkyWater procures tools on behalf of certain customers. Tool revenue is recognized at the point in time when control of the tool transfers to the customer. The point in time when control of a tool transfers to the customer is determined by customer contract terms. For some customers, control transfers when the tool is shipped or delivered to a SkyWater facility, while for other customers, control transfers when the tool is installed, qualified, and placed into service at a SkyWater facility.

Wafer Services

Wafers are goods that are generally customer specific, highly customized and have no alternative use to the Company. Wafer Services customers contract with the Company to manufacture wafers based on their manufacturing design specifications. The terms of Wafer Services contracts dictate when control over wafers is transferred to the Company's customers.

For contracts where orders are non-cancelable and the Company thereby maintain enforceable rights to customer performance, including rights to payment for partially completed wafers at reasonable margins, control over wafers transfers to its customers as wafers are manufactured. For these contracts, the Company recognizes revenue using an input method. This method measures the percentage of completion of wafers still in the manufacturing process by comparing total costs incurred to date to the total estimated costs to manufacture the wafers. The Company records that proportion of the transaction price as revenue in the period. The input method provides the best method of progress as it considers the steps and activities needed to manufacture a wafer and the costs associated with those steps. Costs include labor costs, manufacturing costs, material costs, and other direct costs required to manufacture the customer’s wafers. The estimation of total costs requires judgment and any adjustment to estimates of cost to complete manufacturing may impact the percentage of completion achieved and could result in cumulative adjustments of revenue.

When the Company’s contracts allow for orders to be canceled and it does not maintain enforceable rights to customer performance on canceled orders, including a right to payment for partially completed wafers at reasonable margins, control of wafers transfers to its customers at the point in time when wafer manufacturing is complete, and control of the wafers transfers to the customer pursuant to the customer contract and shipping terms.

The Company has a long-standing relationship with a significant Wafer Services customer. The terms and conditions of this relationship have evolved over time and have impacted the manner in which the Company has recognized revenue. In March 2022, the Company signed a new contract with this customer pursuant to which orders are non-cancelable and the customer maintains rights to specific performance, including an enforceable right to payment for the cost of partially completed orders plus a reasonable profit margin. Given that the wafers produced for this customer are for customer-specific applications with no alternative use to the Company, control of the wafers transfers to the customer over time as the wafers are manufactured.

Prior to March 2022, this customer’s agreement allowed it to operate under a bill and hold arrangement where completed wafers it purchased were shipped to them at a later date of their choosing. Pursuant to the terms of this arrangement, transfer of control of the wafers, and revenue recognition occurred as wafers completed post-manufacturing electrical testing and became available for shipment to the customer. Prior to March 2022, wafers manufactured while bill and hold provisions were in place, were separately identified as belonging to this customer, the wafers were denoted as ready for shipment to this customer in their then current form, and the Company did not have the ability to direct or sell the wafers to different customers. Upon completion of post-manufacturing electrical testing, the Company had the right to invoice this customer. This customer also obtained legal title and the risks and rewards of ownership at that point.

In March 2022 as a result of entering into the new contract with this customer, the Company transitioned away from its point in time method of revenue recognition to its over-time input method of revenue recognition and recorded a one-time, cumulative adjustment to revenue of $8,290 for wafers still being manufactured at the time the new contract became enforceable.

Long-lived Assets

We review long-lived assets, including property and equipment, lease right-of-use assets and intangible assets with definite lives, for impairment whenever events or changes in circumstances, known as triggering events, indicate that the asset group’s carrying amount may not be recoverable. Triggering events include, but are not limited to, reduced or expected sustained decreases in cash flows generated by an asset group, negative changes in industry conditions, a significant change in an asset group’s use or physical condition, and the introduction of competing technologies. When assessing an asset group for impairment, we complete a two-step process. In the first step, we assess the recoverability of the asset group by comparing the carrying amount of the asset group against the sum of the undiscounted future cash flows expected to be generated by the asset group. If the sum of the undiscounted future cash flows expected to be generated by an asset group exceed the carrying amount of the asset group, the carrying amount of the asset group is recoverable and not impaired. If the carrying amount of an asset group exceeds the sum of the undiscounted future cash flows expected to be generated by the asset group, further analysis is required in step two. In the second step, the fair value of the asset group is determined. If the fair value of the asset group exceeds the carrying amount of the asset group, the asset group is not impaired. If the carrying amount of the asset group exceeds the fair value of the asset group, an impairment loss is recognized in the consolidated statements of operations to the extent the carrying amount of the asset group exceeds the estimated fair value of the asset group, not to exceed the carrying amount of the asset group.

54

For purposes of impairment testing, we group assets and liabilities at the lowest level for which identifiable cash flows are largely independent of the cash flows of other assets and liabilities. The undiscounted cash flow analysis consists of estimating the future cash flows that are directly associated with, and are expected to arise from, the use and eventual disposition of the asset or asset groups over its remaining useful life. These estimated cash flows are inherently subjective and include significant assumptions, specifically forecasted revenue and operating margins that require estimates based upon historical experience and future expectations.

We use various approaches to determine fair values of our long-lived assets, including the income approach, the sales comparison approach, and the cost approach. Each approach is inherently subjective and includes significant assumptions, specifically the comparability of similar assets, the potential income and expenses that would be derived or incurred to rent those long-lived assets, obsolescence factors, and capitalization and discount rates.

Due to our history of operating losses, we estimated the fair value of our long-lived assets as of December 29, 2024. The estimated fair value of our long-lived assets significantly exceeded their carrying amounts. As such, we did not recognize an impairment loss against our long-lived assets despite our fiscal year 2024 operating losses.

Income Taxes

In determining taxable income for financial statement purposes, we must make certain estimates and judgments. These estimates and judgments affect the calculation of certain tax liabilities and the determination of the recoverability of certain deferred tax assets, which arise from temporary differences between the tax and financial statement recognition of revenue and expenses. In evaluating our ability to recover our deferred tax assets, we consider all available positive and negative evidence, including our past operating results, the existence of cumulative losses in the most recent years, and our forecast of future taxable income. In estimating future taxable income, we develop assumptions regarding the reversal of temporary differences. These assumptions require significant judgment about the forecasts of future taxable income and are consistent with the plans and estimates we are using to manage the underlying business.

We currently have recorded a valuation allowance that we will maintain until, in the opinion of management, it is more likely than not that some portion or all of the deferred tax assets will be realized. Our income tax expense recorded in the future may be reduced to the extent of a decrease in our valuation allowance. The realization of our remaining deferred tax assets is primarily dependent on future taxable income. Any reduction in future taxable income may require that we record an additional valuation allowance against our deferred tax assets. An increase in the valuation allowance could result in additional income tax expense in such period and could have a significant impact on our future earnings. Because the determination of the amount of deferred tax assets that can be realized is based, in part, on our forecast of future profitability, it is inherently uncertain and subjective. Changes in market conditions and our assumptions may cause the actual future profitability to differ materially from our current expectation, which may require us to increase or decrease the valuation allowance.

Changes in tax laws and rates could also affect recorded deferred tax assets and liabilities in the future. Management records the effect of a tax rate or law change on our deferred tax assets and liabilities in the period of enactment. Future tax rate or law changes could have a material effect on our financial condition, results of operations or cash flows.

55

Non-GAAP Financial Measure

Our consolidated financial statements are prepared in accordance with U.S. GAAP. To supplement our consolidated financial statements presented in accordance with U.S. GAAP, an additional non-GAAP financial measure is provided and reconciled in the table below.

We provide supplemental non-GAAP financial information that our management regularly evaluates to provide additional insight to investors as supplemental information to our U.S. GAAP results. Our management uses adjusted EBITDA to make informed operating decisions, complete strategic planning, prepare annual budgets, and evaluate the Company’s and management’s performance. We believe that adjusted EBITDA is a useful performance measure to our investors because it provides a baseline for analyzing trends in our business and excludes certain items that may not be indicative of our core operating results. The use of non-GAAP financial information should not be considered as an alternative to, or more meaningful than, the comparable U.S. GAAP measure. In addition, because this non-GAAP financial measure is not determined in accordance with U.S. GAAP, other companies, including our peers, may calculate their non-GAAP financial measures differently than we do. As a result, the non-GAAP financial measure presented in this Annual Report on Form 10-K may not be directly comparable to similarly titled measures presented by other companies.

Adjusted EBITDA

Adjusted EBITDA is not a financial measure determined in accordance with U.S. GAAP. We define adjusted EBITDA as net (loss) income attributable to SkyWater Technology, Inc. before interest expense, income tax expense (benefit), depreciation and amortization, equity-based compensation, and certain other items that we do not view as indicative of our ongoing performance, including net income attributable to noncontrolling interests, business transformation costs, CHIPS Act specialist fees, management transition expense, restructuring costs, severance costs and other non-recurring consulting fees.

We believe adjusted EBITDA is a useful performance measure to our investors because it allows for an effective evaluation of our operating performance when compared to other companies, including our peers, without regard to financing methods or capital structures. We exclude the items listed above from net income or loss in arriving at adjusted EBITDA because these amounts can vary substantially within our industry depending on the accounting methods and policies used, book values of assets, capital structures, and the methods by which the assets were acquired. Adjusted EBITDA should not be considered as an alternative to, or more meaningful than, net (loss) income attributable to SkyWater Technology, Inc. determined in accordance with U.S. GAAP. Certain items excluded from adjusted EBITDA are significant components in understanding and assessing a company’s financial performance, such as a company’s cost of capital and tax structure, as well as the historic costs of depreciable assets, none of which are reflected in adjusted EBITDA. Our presentation of adjusted EBITDA should not be construed as an indication that our results will be unaffected by the items excluded from adjusted EBITDA. In future fiscal periods, we may exclude such items and may incur income and expenses similar to these excluded items. Accordingly, the exclusion of these items and other similar items in our non-GAAP presentation should not be interpreted as implying that these items are non-recurring, infrequent or unusual, unless otherwise expressly indicated.

We continuously evaluate the non-GAAP financial measures we use, the manner in which non-GAAP financial measures are calculated, and the adjustments we make to GAAP results to derive our non-GAAP financial measures.

56

The following table presents a reconciliation of net loss to adjusted EBITDA attributable to SkyWater Technology, Inc., our most directly comparable financial measure calculated and presented in accordance with U.S. GAAP.

[[GREPCENT_TABLE]]
[["","Fiscal Year Ended"],["","December 29, 2024","","December 31, 2023"],["","(in thousands)"],["Net loss attributable to SkyWater Technology, Inc.","$","(6,793)","","","$","(30,756)"],["Interest expense (1)","8,837","","","10,826"],["Income tax expense (benefit)","240","","","(521)"],["Depreciation and amortization, net","18,242","","","28,930"],["EBITDA","20,526","","","8,479"],["Equity-based compensation (2)","8,168","","","6,860"],["Restructuring costs (3)","188","","","1,921"],["Business transformation costs (4)","\u2014","","","12,169"],["Management transition expense (5)","903","","","835"],["CHIPS Act specialist fees (6)","\u2014","","","1,320"],["Transaction costs (7)","220","","","\u2014"],["Net income attributable to non-controlling interests (8)","4,276","","","5,663"],["Adjusted EBITDA","$","34,281","","","$","37,247"]]
[[/GREPCENT_TABLE]]

__________________

(1)Includes losses related to the extinguishment of the revolving credit agreement in 2022.

(2)Represents non-cash equity-based compensation expense.

(3)Represents severance and other costs related to the reorganization of our resources.

(4)Represents expenses related to long-term transformation activities focused on improvement in automation and operational efficiency and includes project-based management consulting fees and the write-off of abandoned software assets.

(5)Represents severance and other costs related to the reorganization of the manufacturing and operations leadership team.

(6)Represents project-based specialist fees related to our CHIPS Act application process.

(7)Represents the cost of consulting and professional services incurred to evaluate significant transactions that may, or may not, be executed by SkyWater.

(8)Represents net income attributable to our VIE, which was formed for the purpose of purchasing the land and building of our primary operating facility in Bloomington, Minnesota. Since interest expense is added back to net loss to shareholders in our adjusted EBITDA financial measure, we also add back the net income attributable to the VIE as its net income is derived from interest the VIE charges SkyWater.

57